HAND IN GLOVE

 

For several decades mechanics and engineers have been protecting themselves by wearing latex or vinyl gloves while they are working. It seems strange that after all this time we are still using the medical examination type of glove and no one has addressed the particular problems that this presents to mechanics, engineers, classic, race, kitcar enthusiasts, farmers etc. who use these gloves daily. Until now…

Eurax is now offering Warrior Grip gloves that address many of the problems that we are all familiar with. These gloves are designed to last a whole day at work without ripping, tearing or dissolving. They More >

RIGHT OIL FOR THE JOB

Classic Mini A-Series engines and other classics from that era need a quality multigrade 20/50 engine oil. Lighter, modern oils tend to creep past the valve seals and produce visible smoke when the engine is pushed hard.

Also modern oils don’t have the same levels of protective zinc content as period oils did when the A-Series was new. These factors, along with the fact that 20/50 oils are getting harder and harder to find prompted Mini Spares to take the reins and offer their own brand of engine oil that is exactly right for Minis – and other classic car engines More >

IT’S ALL ABOUT MAGNETISM

 

Draining engine oil can be a messy job, even in a well-equipped garage, but it can also be dangerous. Hot oil can scald and waste engine oil may cause dermatitis or even cancer, plus of course, the sump drain plug usually drops into the drain pan! Laser Tools has something that might help save the day – a new magnetic sump plug tool.

It has an ultra-flexible steel cable and a super-strong magnet to firmly grip the sump plug. Simply loosen off the plug, then attach the tool and spin it off. No dirty oil on your hands, and the sump More >

TF-BASED RPX BODY CONVERSION – EXCLUSIVE

EXCLUSIVE EXCLUSIVE EXCLUSIVE

The excellent RPX from RPS Ltd was officially unveiled to the world last Sunday at the International MG & Triumph show at Stoneleigh, where it met with very positive response.

Garry Hutton, co-director of RPS Ltd told me on Monday: “We were quite knocked out by the response to the car really and have a lot of emails and enquiries to reply to today!”

Based on MG TF the RPX panels consist of new bumpers front and rear, new bonnet, new rear bootlid and air vents, which are all available separately meaning that you can choose what you need rather More >

YOU’RE HAVING A BUBBLE…

The B-G Racing bubble gauge accurately measures from -6 to +6 degree camber and from -4 to +12 degrees castor, displaying the readings clearly on separate positive and negative vials.

A stepped design ensures all the vials are aligned to the hub centre line. The unit is machined from billet aluminium with a black anodised finish and a protective carry case is included.

The B-G Racing bubble gauge has a retail price of £155.99 inc VAT and is available from www.bg-racing.co.uk or 01268 764 411 ENDS.

PINTO GASKET

We all know that it’s sensible to change cambelts at the recommended mileage but while  doing that on Pinto engines it’s a good idea to change the rubber cam cover gasket at the same time.

Like cambelts, the rubber gasket has a finite lifespan so it makes sense to change it while you have the cam cover off. Burton Power has two versions of the SOHC Pinto Rubber Gasket available – ‘narrow’ for the Pinto to August 1983 and ‘wide’ for the Pinto from August 1983 onwards.

The early (narrow) version retails at £13.99 inc VAT and can be ordered as part number More >

FORGET FACTOR 55 – DEI IS THE HEAT PROTECTION TO HAVE!

The new ONYX™ Series Starter Shield from Design Engineering Inc. (DEI) provides reliable heat protection for starters under severe duty or extreme heat. Starters exposed to heat-soak often malfunction or have problems starting reliably. DEI’s next generation ONYX Series Starter Shield provides the highest level of thermal protection to prevent starter malfunction due to heat soak.

The ONYX Series Starter Shield combines two technologically advanced textiles into a dual-layer for maximum thermal control. The outer layer is made from heat-treated glassfibre bonded with molten aluminium then formed into a tight weave for added strength and durability. The inner layer is made More >

BETTER THAN THE SOCKS AUNT DORIS BOUGHT YOU FOR CHRISTMAS!

Eurax has announced that it is now a distributor of ISSE products, including the winter-friendly Super Snow Socks.

Snow socks have been around for a long time, of course and have established themselves as a superior solution to snow chains for driving in snow; they are easier to carry, fit and remove as well as being less expensive.

ISSE has taken things a step further by making the Super Snow Sock suitable for driving on tarmac (up to 50km/h, 30mph) while providing a better grip into the bargain.

They will work on patchy snow, slush and ice as well as deep snow; you More >

SPECIAL OIL FROM MINI SPARES

Classic Mini A-Series engines and other classics from that era need a quality multigrade 20/50 engine oil. Lighter, modern oils tend to creep past the valve seals and produce visible smoke when the engine is pushed hard.

Also modern oils don’t have the same levels of protective zinc content as period oils did when the A-Series was new. These factors, along with the fact that 20/50 oils are getting harder and harder to find prompted Mini Spares to take the reins and offer their own brand of engine oil that is exactly right for Minis – and other classic car engines More >

NEW STUFF FROM PRO ALLOY

Pro Alloy is well-known for the quality of the various tanks and related products they produce and they’ve just added a couple of notable products to their range.

A new silicone hose section on their website lists all the usual shaped hoses you would expect to see if you’re having a go at building custom pipework yourself. High quality 45-degree, 90- degree, 135-degree, reducing joiners and straight lengths of hose are all available to buy.

The hoses are pro Alloy branded with all sizes available in traditional red, blue or black and the Suffolk-based company aims to hold as many hoses as possible in More >

z library