PUT A TOP ON IT

Cool new hardtop for the Quantum Xtreme

Rob Hancock of Quantum Sportscars was at the Newark show last weekend and among the display of Xtremes, the company’s new hardtop was unveiled.

A very pleasing on the eye top it impressed many with its quality. For a start, this isn’t a surprise because Rob is one of the finest laminators that I know.

Orders are being taken now and costs are competitive – prices start at £795 for an un-trimmed hardtop, with £995 featuring an Alcantara headlining. Doors are an additional £425

More information from www.quantumsportscars.com or 01364 388 008 or even 07565 956 138 ENDS.

More >

I’M FOREVER BLOWING BUBBLES …

Martin Langley, the man behind the electric Sparky iZett (Isetta 300 replica) project has been in touch with an update on how the little car is progressing.

* Awarded start-up funding in May

* Completed rolling chassis and video in June

* Acquired GRP replica bodyshell in July

* Promotional video of the completed prototype

* Proposed exhibit of the completed prototype at London Fashion Week September

* Proposed exhibit of the completed prototype at London EV show in November

The customer has a choice of products depending on their level of expertise. The Big Tomali comprises a replica of a BMW Isetta 300 three-wheeler with electric More >

KEEP YOUR TOOLS CLOSE AT HAND

Keep tools and parts close to hand and within easy reach with this mobile service table (part number 8371), perfectly designed to be positioned over a vehicle engine bay, in a vehicle via the doors, or over the car boot.

The simple but robust design allows the tray to be moved up and down by a single support, with height adjustment from 515mm up to 1300mm (great for commercial vehicles), ensuring the tray can be positioned at the required height for easy access.

The service table has a maximum loading capacity of 50kg, so will take a slave battery, and the tray More >

DON’T MESS AROUND WITH TYRES

Ring Automotive has reiterated the need to look after tyres, following research by road safety charity TyreSafe revealing that more tyre-related incidents are reported in summer than at any other time of the year.

With longer journeys to holiday destinations across the UK and Europe, plus heavier loads with passengers and luggage onboard the car, drivers are being reminded to check their tyre pressures and tyre condition before setting off.

Henry Bisson, marketing director at Ring, said: “The TyreSafe charity research reveals that there’s an alarming rate of tyre failure-related incidents on UK roads, particularly in the summer months.

It’s imperative, therefore, that More >

INVERTER GENERATOR RANGE FROM MACHINE MART

The superb NEW range of small portable Clarke Inverter Generators are ideal for providing a ready source of electrical power for camping, caravanning, motorhomes, market stalls, boats, etc.

These three models use ‘Sine Wave Technology’ ensuring the delivery of clean and stable power, vital when running sensitive electrical/electronic equipment such as TVs, computers and laptops.

Max power options range from 800W to 1800W and all three feature easy start, efficient 4-stroke engines that include an Eco throttle system and low oil/overload shutdown for greater fuel efficiency and reduced running costs

They are compact, super light (from only 9.3kg) and housed in a stylish More >

GLIPTONE – NOT JUST LEATHER CLEANERS – GLASS, TOO

Heavy Duty Glass Cleaner is another cool product from New York’s king of car care, Gliptone, available in the UK now from the good folks at Staingard.

This is a professional-strength aerosol glass cleaner that is ammonia-free, can be used on tinted glass both inside and out.

A 696ml aerosol can costs just £7.70 and is available now from www.gliptoneeurope.com ENDS.

NEWARK 2022 – SHOW REPORT

NEWARK SHOW REPORT – words and photos by Carol Hardy

DATE FOR 2023 IS JULY 22 & 23

PHOTOS BELOW

What a brilliant event the ‘new’ Newark show was. After a five-hour-plus journey up the M11 and A1 on Friday afternoon, I was hot and bothered when I arrived to set up.

It did feel good being in a venue that I first exhibited at way back in 1985 (right up until the show ceased in June 2013) and the place is as one almost with the kitcar industry although I was slightly concerned about the fact that there’d been a nine-year gap.

I needn’t More >

COOL REPLICA FOR SALE

CHEVROLET CORVETTE C4/FERRARI TESTAROSSA SPYDER REPLICA

This vehicle was made in California, USA from a base car of a 1991 Corvette Convertible C4 5.7 V8 Tpi automatic. ‘A proper car’ the current owner says adding ‘THIS IS ONE OF A KIND and has the best fibreglass panel and bodywork I’ve ever seen’. He has owned the car for 26 years.

Spec is high and includes Sabelt racing harnesses, Compomotive split rim wheels, custom mats, Nardi steering wheel, genuine badges, Sony ten-disc stereo and Bose subwoofer, 11mm high tension leads, talking alarm, aluminium grilles, quick shift kit in the gearbox, etc.

If you are More >

CATERHAM CHANGES TO THE BARC

Caterham Motorsport is about to see its biggest shake-up in over three decades.

Caterham Cars has announced that they will be joining the British Automobile Racing Club (BARC), one of the UK’s biggest motorsport organisations, as their new official club for motorsport events (for the 2023 season and beyond).

Since the 1990s, their motorsport championships have operated as part of the British Racing & Sports Car Club (BRSCC). Over the years, the five championships have grown exponentially thanks to Caterham’s innovative formula, allowing drivers of all budgets and experience to participate on an equal footing. Now, they hope to take those championships More >

THREE BIRDS; ONE STONE

New from Laser Tools is this 3-in-1 riveter, rivnut and reaming/nibbler tool (part number 8355). This robust, multifunction tool combines a rivet gun, capable of installing both hand (pop) rivets and rivnuts/nut-rivets, with a reaming/nibbler tool suitable for use on mild steel, stainless steel, galvanised steel and aluminium.

The tool features soft grip handles allowing for easy one-handed operation along with a 360° swivel head for ease of access. Supplied with four colour-coded rivet heads suitable for fitting 2.4, 3.2, 4 and 4.8mm hand (pop) rivets. Rivnut mandrel sizes include M3, M4, M5 and M6.

For the nibbler, two different reaming/nibbler broaches More >

z library