FIVE-SPEED UPGRADE

Get the best of both worlds – acceleration and easy motorway cruising – with a Mini Spares five-speed gearbox. All come fully assembled and ready to install.

Both helical and straight cut gears are available and they can be specified with either the original open differential, Mini Spares cross pin or limited slip differential.

The gearbox is suitable for 1275-1380cc engines (except those with extra boosted turbos). The gear case has undergone extensive modification and upgrading by Mini Spares with no fewer than 58 improvements to the linkage and gear components.

The gearbox features a closer ratio gear set than the standard four-speed More >

BURTON RETAIN THOSE SPRINGS

Burton Power has announced that they can now supply ultra-lightweight titanium valve-spring retainers for Ford SOHC Pinto, CVH and Essex V4/V6 engines.

The retainers are suitable for models that use these engines and include many of the most popular Fords such as the Capri, Cortina Mk3 onwards, Escort/Orion, Granada and Scorpio, Sierra, Transit, Fiesta including the Mk2 XR2, XR2i and RS Turbo as well as older classics like the V6 Zephyr Mk4 and Zodiac Mk4.

These engines were also used in other marques, including many kitcars and the retainers are also suitable for the Pinto powered TVR Tamsin 200 2.0, the Ford More >

PUMP IT UP

Webcon has added a 24v fuel pump to its range of ultra-reliable, low-pressure fuel pumps and part number WFP511 is designed for large-capacity carburetted petrol engines and has the following specification:

Flow: 35 gallons per hour free flow Voltage: 24v Pressure: 5-9 psi Fittings: 3/8 hose

WFP511 is supplied with mounting bracket, fuel line clips and hose tails to facilitate mounting into metal fuel lines and is priced at £65.95 inc VAT.

Webcon can also supply a range of 6v, 12v and 24v carburettor pressure fuel pumps.

Available now at the other end of 01932 787 100 or via www.webcon.co.uk ENDS.

More >

CARE FOR YOUR NEW ENGINE

Lots of engine builders, particularly those in the USA, like to use diesel motor oil as a break-in lubricant for new engines because it contains plenty of zinc (ZDDP) to protect flat tappet camshafts.

It’s said that this oil is being replaced with a new formulation, API CK-4, that reduces levels of ZDDP, on the order of 800 parts per million (ppm). That’s not enough to prevent premature cam wear or even failure in engines with flat tappet camshafts.

Fortunately, the oil experts at Joe Gibbs Driven offer BR-Series Break-In Oil that contains highest levels of zinc and phosphorus to promote piston ring seal and provide More >

GOING FOR GOLD

Heat protection specialist, Design Engineering Inc now has DEI Heat Sheath Gold™ sleeving to keep critical lines, wiring looms, air intakes and hoses cool and protected.

DEI Heat Sheath Gold™ is manufactured from high-temperature resistant metalised polyamide lamination, bonded to a robust 20oz heat treated glass fibre base material.

The product will protect and keep components cool in the most demanding applications and is capable of reflecting direct heat up to 800˚F (approx. 427˚C) and radiant heat up to 1100˚F (approx. 593˚C). It can be easily cut and trimmed to size as required.

DEI Heat Sheath Gold™ is available in the following sizes: More >

J15 RE-JOINS VECTIS ON SYLVA PRICELIST

Sylva J15 back in production

After virtually ceasing production of their Ford-based J15 model, Sylva Sportscars has re-introduced it, due primarily to public demand, after it had been superseded by the MG TF-based Vectis , with which it shares its shape.

Sylva boss, David MacBean told me: “I always wanted the option of a Ford-based car and while the TF-based Vectis is cost-effective there is a definitely a market for the Ford-based J15 that we couldn’t service without that car.”

David will balance production of the two models by producing them in small batches to ease manufacture issues for a small company.  I More >

WEBCON’S NEW FUEL PUMP PACKS A PUNCH

Webcon has added a 24v fuel pump to its range of ultra-reliable, low-pressure fuel pumps and part number WFP511 is designed for large-capacity carburetted petrol engines and has the following specification:

Flow: 35 gallons per hour free flow Voltage: 24v Pressure: 5-9 psi Fittings: 3/8 hose

WFP511 is supplied with mounting bracket, fuel line clips and hose tails to facilitate mounting into metal fuel lines and is priced at £65.95 inc VAT.

Webcon can also supply a range of 6v, 12v and 24v carburettor pressure fuel pumps.

Available now at the other end of 01932 787 100 or via www.webcon.co.uk ENDS.

More >

VERY CUTTING

Cutting automotive battery cable can be problematic – it’s difficult to cut and even more difficult to get an even, professional-looking cut. Is there actually a way of doing it easily and above all, neatly? Well there is now!

Newly introduced by Laser Tools is this handy cable cutter (part number 6872) that is designed to effortlessly snip through automotive cable of up to 70mm² in size. Just as easy as using a pair of scissors and it leaves a professionally cut cable.

Removing the insulation is just as simple and the tool also includes a handy insulated terminal crimper, which makes More >

TIME FLIES

Great news for kitcar owners with Toyota engines in their cars. Fidanza now offer a range of performance equipment for various Toyota models.

Lightweight Steel Flywheels A brand new Lightweight Steel Flywheel channels more power to the wheels by reducing parasitic losses, as well as enabling smoother, faster gear-shifting and improved braking by reducing the rotational mass.

The 1045-forged billet steel combines strength and durability and is legal for use in racing categories where SFI is required. Fidanza flywheels are CNC-machined for accuracy, which ensures a perfect fitment with every item. Fidanza Lightweight Steel Flywheels are available for: Toyota Celica GT-S 00-05 More >

GRAND PRIX WHEEL

Momo reckons that their heritage has been reborn with their new ‘Grand Prix’ steering wheel.

The wheel has a mahogany wood rim with a semi-matte finish, accented with polished-chrome aluminium spokes and featuring the Heritage ‘MOMO’ logo on the horn button.

This classic wooden wheel reflects the true heritage of Momo, going all the way back to its beginnings in 1964 and is priced at £299.99.

More information from www.momo-uk.co.uk or www.b-gdirect.com or 01268 764 411 ENDS.

 

z library