PATCHES

New from Car Builder Solutions is this new Liqui Moly Exhaust Repair Bandage.

It repairs small holes and cracks in exhaust pipes and silencers and comes with a tub of heat-resistant exhaust paste and one metre of 60mm wide ceramic tape.

You will need to clean any loose rust, grease or dirt from your repair area, give the repair paste tub a shake and apply the paste to the pipe, then a layer of bandage and paste, alternately as you wrap the repair. Secure with wire until cured.

Exhaust heat will cure the paste and complete the repair and it can withstand temperatures up More >

LIGHT UP DARK NIGHTS

With darker nights coming Machine Mart wants to make the point that they stock a wide range of free-standing work lights and floodlights to help keep you in action over the winter months.

Their lights are all portable and have an IP44, IP54 or IP65 rating, making them suitable for internal or external use.

We supply lights on a strong, sturdy tripod or with a useful carry handle meaning they can also be used for a variety of purposes.

The Clarke COB10CR is a rechargeable work light, ideal for site or home use, offering a 650lumen floodlight and 2½ hours of working time More >

LOWERED MANUAL

In keeping with its policy of producing parts for the classic Mini which are no longer available from the original source, Mini Spares is pleased to announce the introduction of a Lowered Engine Mount Bracket for manual transmission Minis.

This engine mounting bracket fits to the alloy bracket (12G1318) on the front cover of the gearbox which also holds the radiator support bracket.

The bracket can be ordered as part number 12A361 at £54.72 inc VAT.

For more details call 01707 607 700 or visit www.minispares.com ENDS.

STING IN THE TAIL – TOM KILLEEN’S SCORPION K19

The Scorpion K19 was created by serial specials builder, and ex-Jensen engineer, Tom Killeen and derived (funnily enough) from his Rycam Mirage K18 creation (qv) although it was 3in longer

Rycam Engineering marketed the kit package although in 1973 they went into liquidation. Innes Lee, part of Innes Lee Industries of Lutterworth, took over and launched the car at the Earls Court Motor Show in November of that year where it was part of the Tudor Safety Glass Campaign.

Powered by – and based on – Hillman Imp with the 875cc engine hanging out back, with a fibreglass semi-monocoque and pressed steel floorpan More >

SUPERCHARGE YOUR TYPE 1 VEEDUB ENGINE

Now, here’s a brilliant new tuning kit for Volkswagen Type 1 air-cooled engine. Therefore, it has massive potential for most Beetle-based kitcars including Speedster, 550 Spyder and RSK replicas. It’s a supercharger kit for the Type 1 unit from aviation jet engine engineers, Mark Allen and Dave Godfrey of Nottinghamshire-based Kompressorhaus.

Two versions of the kit are available – the Sleeper at £1295 inc VAT includes items such as Serpentine pulley kit, Aisin AMR500 supercharger, stainless-steel brackets, pipework, fasteners and more. The Ultimate package costs £1650 inc VAT and adds genuine twin Weber DCOE carbs which are pre-tuned and tailored to your engine. The Ultimate better suits 1600cc More >

KITCARS AT THE BOAT SHOW

OLYMPUS DIGITAL CAMERA

The latest missive from Tim Dutton is, as always, short but very sweet and to the point.

Tim will be at the Southampton Boat Show (Friday, September 16 to Sunday, September 25) and can be found floating at pontoon ‘M015’ and will have the new facelifted version of their Surf model on display.

We haven’t got an image of a revised Surf yet but here’s one Tim made earlier.

More from www.timdutton.com ENDS.

THREE SPECIALIST ELECTRIC RETROMODS

I like to keep an eye on developments within the electric car sector although naturally enough I have a particular interest in the specialist car side of things and three recent developments have caught my attention. Two of them are available to buy with the third one a concept – at the moment.

They definitely fit under the term restomod and are also very specialist but it’s good to see a couple of mainstream giants revisiting their pasts. I do wonder if these cars weren’t electric if they’d ever see the light of day, though.

First up is this lovely Fiat Jolly More >

BELT AND BRACES

This nifty little gadget is a double-sided stretchy-belt tool that is used for safely removing and installing stretchy drive/alternator and accessory belts without causing damage to either the belt or the pulley. Just introduced by Laser Tools (part number 8331), this is a combination of removal and installation tools for most stretchy-belt applications.

On the face of each side of the tool is a strong magnet to keep it in position as the pulley is turned to remove or install a new belt. As you rotate the crankshaft or pulley (by hand with a ratchet), the belt is eased steadily over More >

OLD SCHOOL NEW SWITCHES FROM CAR BUILDER

The latest batch of new products goodness from Car Builder Solutions has arrived at their Staplehurst, Kent HQ – don’t forget they have a shop onsite where you can personally collect your order. A lovely drive out in the Kent countryside is an added bonus of doing that.

Loving the range of old-school Bakelite-type switches that are new in including this on/off illuminated push/pull switch in green (they also have an orange one, too).

It mounts through a 12mm hole in panels up to 6mm thick. It features 1/4in spade terminals and is 16-amp. The knob (easy!) diameter is 2mm and the More >

WOOLIES OPEN TEMPORARY BRANCH AT BEAULIEU!

Our friends at soft trim (and more!) parts meisters, Woolies will be at the Beaulieu International Autojumble on Sat 10th and Sun 11th September 2022. Obviously, it’s a great event, to find out more about it click here.

You will find Woolies in their usual location – Red Field – stand numbers R172, R173 and R174, near the information portacabin next to the embankment.

They will have a lot of products with them at the show but remember if you want a specific product(s) brought to the show please order in advance. This guarantees you will get what you came for and can save you time More >

z library