‘KWAKKERS’ GBS ZERO!

Unusual GBS Zero seen here. It was prepared and presented to IVA by Great British Sportscars and is now registered and heading off to its excited new owner.

The Zero Custom self-build option that GBS offers allows customers to tailor the Zero to the engine configuration of their choice, whether that is an already compatible engine or a completely custom engine installation.

This customer-built Zero is powered by a Kawasaki 1400 GTR motorbike engine and will be enjoyed on both the road and track. 

The Kawasaki 1400 GTR engine produces 140bhp with a six-speed sequential gearbox with an Emerald K6 ECU.

A cracking example More >

PART OF THE UNION 2!

Merlin Motorsport offer a no-hassle way to make up hoses to your own specifications using any kind of unions or hose off their shelves – they can make them for you. No charge for this service when all parts come from Merlin Motorsport.

Read more here – BESPOKE HOSE BUILDS BY MERLIN

Pictured here are some fuel hoses ‘before’ a customer had chosen the right unions. These were measured out using cheap hose in order to show Merlin’s technicians what was required. Also pictured is ‘after’ – the finished new hoses were produced. These were destined for a Raw Striker that had an More >

WITHAM ANNOUNCES MOTORSPORT PLANS FOR 2023

Witham Motorsport has announced an exciting new programme to support the UK motorsport 2023 season.

The UK lubricant manufacturer will be supporting a variety of British Motorsport competitions including the Protyre Motorsport UK Asphalt Rally Championship, British F4 Championship, 5 Nations British Rallycross, BTRDA Clubman’s Rallycross Championship, MG Championship, British Speedway, British Truck Racing Championship, BRSCC Mazda MX-5 Super cup, National Kart Racing Championship, Offshore Powerboat Racing and various Master Historic Race events.

Witham Motorsport is also one of the key partners for the Protyre Motorsport UK Asphalt Rally Championship – which consists of seven events held at various locations across the More >

KEEP IT COVERED

Machine Mart’s range of garage/workshop/shed units come in a variety of sizes to suit your needs, allowing you to protect your pride and joy or create an additional workspace in a tight-fit, well-lit protected environment.

At the smallest end of the range are two fantastic bike sheds. The smallest of those, the CIB635 Bicycle Shed is ideal for protecting your bicycles from the elements. Not only does it work as a bike storage area, but it can also be used on-site, or at events for storage of various equipment. It measures 1.86m in length, 1.58m in height and 0.98m in width.

A More >

PIPE AND SLIPPERS

Modern automotive pipe and hose fitting are designed to be quick to fit or remove but what if you cannot actually get to them? This new Scarab quick-connector disconnect tool from Laser Tools (part number 8473), is compact, easy-to-use and both the spring-loaded scarab jaws and the handle swivel to let you gain access in the tightest of engine bays.

It is designed for two-button-style quick connectors used on fuel, oil, AdBlue® and cooling systems. The handle has a sand-dipped textured finish for improved grip and swivels through 180°.

Together with the 80° movement of the scarab jaws this enables easy one-handed More >

HERITAGE PARTS CENTRE LAUNCHES ‘HERETICS ON THE ROAD 2023’

VW and Porsche fans in the UK have a few more dates to add to their diaries in 2023 thanks to specialist supplier Heritage Parts Centre announcing they are taking their Heretics meet-ups on the road this year.

On top of three evening events at Heritage HQ in Shoreham-by-Sea on Thursday, April 20, Thursday, June 15 and Thursday, September 7, enthusiasts will be able the enjoy a similar smorgasbord of cool cars and campers at a trio of guest locations around the UK too.

May’s event is scheduled for the evening of Friday, May 26 and will be hosted by Type 2 More >

DON’T HURT YOUR ‘AN INSERTS’!

NotcHead’s AN Wrench Inserts are the safe and smart way to wrench on AN fittings without damaging them.

Made from Delrin, the inserts slide into your SAE open-end wrenches and take the stress from the fittings, allowing you to loosen and tighten them to your heart’s content without hurting them.

The inserts are sold in a set of six in the following sizes:

  • -3 AN • -4 AN • -6 AN (includes both the -6 AN insert plus a ¾in insert for the other side of the fitting) • -8 AN • -10 AN

Find out more here NotcHead AN Wrench Inserts ENDS.

More >

NEW ELECTRIC KITCAR LOOKING FOR A SPARK

A very exciting electric kitcar project could still reach production if a partner can be found. It comes from the talented British-based, Polish designer, Zbigniew Dubiel and is called the Navrot, named after a famous Polish car designer called Cezary Nawrot who designed the Syrena Sport back in the late fifties.

Zbigniew takes up the story: “While creating this design, the biggest challenge for me was to visually connect the new electric powertrain technology with the kitcar community without creating an overly futuristic, or extravagant/extreme design.

“The whole idea to design and build this car came from the Polish investment company JJ Invest in the city of Lodz. The owner of the company is very passionate about cars and More >

BANG A GONG! ANOTHER AWARD FOR AUTOGLYM!

The royal-warranted car cleaning experts at Autoglym are delighted to announce their success in the prestigious UK Business & Innovation Awards 2023. An independent panel of seasoned professionals with distinguished careers judged Autoglym’s best-selling Polar Series range for pressure washers as the winner in the Best Innovative Product category among business-to-consumer goods.

The annual UK Business & Innovation Awards is designed to recognise and promote innovation – a quality that drives business and society forward. Being judged as a gold winner in any of the award’s categories demonstrates that an organisation is delivering extraordinary levels of innovation in its product offering.

In More >

PART OF THE UNION!

A great article in the Merlin Knowledge Base describes how to assemble a fuel or oil line using the popular range of Aeroquip Push-Fit (Socketless) FC332 or FC598 hose and associated Aeroquip hose unions.

These are ideal for self-assembly kitcar applications. Note that the assembly process is the same if you’re using any of the Push-Fit unions Merlin Motorsport sells – whether using Aeroquip, Goodridge 536 series or their own Merlin Push-Fit unions.

See the article here – SELF ASSEMBLING A PUSH-FIT FUEL/OIL HOSE

The Aeroquip hose and Push-Fit union combination pictured here are a proven favourite for many for several reasons. It’s cost-effective, strong, robust and can be assembled at More >

z library