Dave Jones is a name familiar to many kitcar enthusiasts, as he formerly ran MR2 Kits, before selling the operation in late 2010.



Current custodian of MR2 Kits is Terry Cole, although he only supplies the GTF (F430) package and not the GTA (F360) or GTB (F355) body conversions.

Well, that’s all changed this week, as Dave Jones is back! He’s set up a new operation called ‘Dave Jones Kitcars’ and has both GTA and GTB kit packages available now at a kit price of just £1950 for both Toyota MR2-based models.

More from www.davejoneskitcars.com or 07855 549 112 ENDS.

More >


Turbo conversions are always very popular, so with that in mind, Jenvey has produced a useful modular system that can fit most applications. Through careful design they have created a plenum that will feed the air evenly over all four-cylinders.

The diffuser and top cover can be bolted on so that the air can be brought in from any of four positions. The sealing is achieved via ‘O’ rings so maintenance is easy, while there are positions for various take-offs.

The plenum is made from cast aluminium and cast in Jenvey’s own foundry. The construction combines lightweight with high strength and it’s More >


There are plenty of self-fusing silicone repair tapes on the market today, but there is only one genuine ‘Rescue Tape’.

The product has been around for over six years in the USA and now it is available in Europe through Viper Performance.

Rescue Tape has a tensile strength of 950 psi, it resists 500 degrees F (260 degrees C), insulates up to 8000-volts and it can even be applied underwater and can also be used oil, hydraulic, fuel, water and air lines and is resistant to oil, fuel, acid and hydraulic fluid. It will create an air tight seal and can even More >


Webcon is delighted to announce that top cover assemblies for the Weber 40 and 45DCOE carburettors are now available separately. Supplied complete with Spansil float, needle valve, gasket and single fuel union, the top covers are available as follows:

40 DCOE wears part number 3173419700 with the 45 DCOE listed as 3173419800 with both priced at £80.89 inc VAT.

Available directly from Webcon and from their appointed dealers around the world. More from 01932 787 100 or visit www.webcon.co.uk ENDS.


Burton Power is pleased to announce that they have stocks of quality aluminium bellhousings for the Escort Mk1 RS2000 and Escort Mk2 (RS/Mexico).

These bellhousings will also fit most other Ford four-cylinder engines such as the SOHC Pinto, Crossflow (Kent), Pre-Crossflow, BDA/BDG, Lotus Twin Cam 1558cc 8v, CVH and Zetec E and can therefore be used to adapt to a Rocket/Type 9 gearbox. The bellhousing has provision for the starter to be fitted to either side so is suitable for LHD and RHD vehicles. The Burton Escort Mk1 RS2000 and Escort Mk2 (RS/Mexico) bellhousing retails at £175 inc VAT and the More >


Wilwood four-pot calipers are a popular upgrade on many kitcars, indeed, they are standard fit on quite a few.

Cambridge Motorsport Parts now has stocks of the latest Hawk Brake Pads, specially designed for use with Wilwood Dynalite, Superlite, Powerlite and Midilite caliper ranges. Hawk pads are said to offer a significant improvement from low-dust, low noise, fast road pads to high friction trackday and full race compounds. Prices start at £56.64 inc VAT. For more details call 01462 684 300 or www.cambridgemotorsport.com ENDS.


High performance engines require upgraded and improved cooling systems for maximum reliability. Here’s a handy new part from Cosworth for Honda units such as the K20a.

One important component of the upgraded cooling system is a thermostat that opens to allow coolant passage through the engine and cooling system at reduced temperature compared to the original equipment thermostat. Reducing the temperature by approximately 10-15C compared with that of a standard thermostat, the Cosworth LowTemp Motorsport Thermostat for the Honda K20-K24 DC5, EP3 improves coolant circulation through the engine by starting the process earlier than the original equipment. These thermostats are engineered More >


Ring Automotive has designed a new range of car mats that reflect the demands of consumers, following extensive primary research. The new range offers a number of unique and innovative designs that consists of high quality PVC mats, carpet mats and combined PVC and Carpet mats.

There are eight new designs in the range and one design back by popular demand. The new mats are, Dura Shield, Carpet Shield and Ultra Shield.

Ultra Shield is a combination of PVC and carpet. The PVC surface provides increased durability, protecting the interior of the car, while the hardwearing carpet inserts add a touch of More >


Internationally-renowned tool manufacturer Facom has redesigned its range of hex and torx key sleeves. The new range is now conveniently colour-coded red for hex keys and black for torx keys. The new more compact sleeve has a hinged top and conveniently placed hole for hanging.

The new sleeve design means that mechanics and engineers can quickly and easily identify the various keys and choose the right size immediately. Each key is held into the sleeve with a secure fastening which allows easy removal of a single key without any of the other keys moving or sliding out of place. It also More >


GAZ Shocks can offer coil-overs for a huge range of applications, but once in a while they get requests for something that isn’t in their current line-up.

GAZ can also offer a bespoke build service to produce custom suspension components to

match customers’ needs.

The system pictured here is a typical example of what can be produced. It is a shortened GAZ Gold coil-over with remote fluid canister mated to an integral hub, which has been

reconditioned from the original vehicle’s suspension.

If you have a special project in mind or simply can’t find performance suspension for your vehicle just give the Technical Department at More >