COOLING AN ISSUE IN HOT WEATHER? GIVE THIS STUFF A TRY

The summer in the UK might be short but the hot weather can certainly do some damage to your vehicle’s engine if you don’t keep your cooling system in good shape.

Fortunately, the solution is simple. Just add a bottle of DEI Radiator Relief™ to your coolant and your vehicle’s operating temperature will be reduced by up to 30°F the maker’s claim. (16.66° Celsius).

Engine wear will be minimised, the temperature gauge needle will stay away from the red section when sitting in summer traffic jams and you won’t be bothered by an overheating radiator ruining your day out.

Radiator Relief™ works by More >

CLUTCHES ON SPEC FROM SUMMIT RACING

Summit Racing offers a large selection of SPEC Clutch Kits. They are available in various torque capacities depending on your use, so a consultation with a Summit Racing sales rep is highly recommended. All clutch kits come with a matched pressure plate, throw-out bearing, and installation tool.

Stage 1 Clutch Kits

The Stage 1 kits feature a double-sprung clutch disc with a steel-backed, carbon/KevlarÒwoven facing that offers smooth engagement and excellent life under high clamp loads and temperatures.

Stage 2 and Stage 2+ Clutch Kits

The Stage 2 kits have a full-faced pure double-sprung clutch disc with steel backing depending on the application. This More >

MORE COOL DESIGNS FROM ROOK DESIGN

Specialist car design studio, Rook Design has been busy working on their Diamondback rendering, based around MX-5, although it has now been re-named, Wraith. Several versions of the car are being considered, the 1.1, which has a Cobra-style front-end and 250-style rear, based on Mazda MX-5 Mk3, while V1.2 uses the MX-5 Mk2 as donor and a more exotic Italian look.

The company’s HK1 has also been re-named and is now known as the Ghost.

More from www.rook-design.co.ukor call Phil Rookin on 07716 467 684 ENDS.

NEW KIT SPARES FROM KITSPARES

Great British Sports Cars’ Kitspares division is rapidly adding products to their parts inventory and these include:

Throttle Bodies – NEW ATR 45mm DCOE throttle bodies currently available for Ford Zetec, Duratec 2.5-litre, Mazda MX5 1.6-litre along with backplates, filters and all other parts required and more: https://www.kitspares.co.uk/index.php?route=product/category&path=43_8_58&car=43

New DRL-style LED headlights: https://www.kitspares.co.uk/index.php?route=product/product&product_id=709&search=led

 

Fuel Filler Caps now available in Black, Silver and Orange vented and non-vented:

https://www.kitspares.co.uk/index.php?route=product/product&product_id=1126

More information from www.kitspares.co.uk ENDS.

ONE STOP CAR CARE SHOP

Slim’s Detailing is one of my favourite outlets for car care stuff, with no fewer than 48 brands stocked including Britemax, Poorboy’s World, Menzerna, GTechniq and CarPro, while they are also main distributors for Chemical Guys, Presta, InstaFinish, Malco and Wolfgang.

Whenever I go to the US I spend far too much time in the many car care stores, which are my idea of a toy-shop. They do these types of retail outlets well in the States, but they aren’t so well-known here in the UK.

Well, Slim’s Detailing has a shop to rival the best American outlets and when I’m in More >

PRESSURE WASHER DEALS FROM SEALEY TOOLS

Sealey Tools has introduced a couple of new pressure washer combination deals to their range. They are ideal for a range of applications including cleaning vehicles, commercial equipment, motorbikes, patios and decking. There are two models available.

The PW2500 is fitted with a powerful 2200W motor with a 438ltr/hr water flow rate and a maximum pressure of 170bar. This unit incorporates a five-metre hose reel. The PW2200 is fitted with a powerful 1800W motor with a 400ltr/hr water flow rate and a maximum pressure of 140bar. This model is fitted with dual built-in detergent tanks.

Both models are fitted with a Rotablast® More >

NOT JUST FOR SAUCEPANS!

When Carol presented me with a couple of brass saucepans she’d picked up for a song at a local charity shop, I was aghast.

She reckoned that because I had loads of car care stuff and metal polishes it would be easy for me to bring them up nicely and take them back to a glossy finish. They were in a terrible state, not only un-cared for but also dirty and caked in grease.

I tried a couple of my regular metal cleaning products and it didn’t look good. I figured I’d have to get the Dremel out but then I remembered More >

NOTHING MORSE CODE ABOUT THESE DASH BOLTS FROM RALLY DESIGN

Rally Design is now stocking a full range of dash-3 brake pipe fittings, manufactured from 303S31 stainless with ‘silk sheen’ finish and manufactured in the UK.

The range includes fittings with convex or concave tips, M10 x 1 or 3/8 UNF stub, standard or bulkhead length, banjo and banjo bolts plus specials.

Prices as follows: bolts from £2.40 each inc VAT, standard fittings £8.95 each inc VAT and banjos from £7.07 each inc VAT.

For more information contact www.rallydesign.co.uk ENDS.

IT’S NOT KRYPTONITE SUPERMAN!

Alien Magic is a cool, artisan UK car care manufacturer and they recently sent me a bottle of their Krypton Si02 Quick Detailer and told me to put it to test as they reckoned I’d be pleased with the results.

Well, I tried it on my black X5, which had been pressure washed to get the worst of the road grime and sandy water spots from the ‘Saharan rain’ that came our way in Surrey recently. It did the job beautifully and worked well on top of the ceramic coating I’d put on it a few weeks ago.

Ceramic coatings are great More >

REGAL CALIPERS!

Four-piston ‘Princess’ calipers were commonly fitted as an upgrade to many Fords – and Ford-based kitcars, of course – that used the M16 caliper as it conveniently had the same mounting bolt pattern.

These Leyland calipers have become difficult to find as the Princess and Ambassador donor cars are rare beasts these days.

Burton Power is now able to offer a faithful reproduction of the ‘Princess’ caliper for those that prefer a period modification. The new calipers are now supplied with a spacer kit that allows them to be used with vented discs. Handy.

The calipers can be ordered as part number CAL4POTV More >

z library