THIS ONE COULD BE A GAMECHANGER!

Swindon Powertrain’s compact HPD 80kW ‘crate’ motor for electric vehicle conversions is now available to order from its website. Suitable for OEMs, niche vehicle manufacturers, electric car conversion companies as well as the enthusiast home mechanic.

Prices start at just £7680 inc VAT for the 80kW motor, transmission and differential with options for cooling, inverters and limited-slip differential also available. Deliveries to the first customers will commence in August 2020.

Devised as a response to the lack of compact engineered EV systems available to enthusiasts and smaller OEMs, Swindon Powertrain has refined and improved the HPD’s specification since it was first announced More >

MERLIN HAS A GOODRIDGE ROOM!

If you are liking the idea of fitting Goodridge Brake Hoses to your car but are a bit scared of cutting and prepping them, then Merlin Motorsport can help.

At their (newly enlarged!) Castle Combe Circuit-based store they not only have a dedicated ‘Goodridge room’, but they stock everything that the Devon manufacturer produces. What’s more they have got all the proper machinery and equipment on-site to make bespoke brake and oil lines quickly and easily.

Click the link to find out more about Merlin Motorsport’s GOODRIDGE G-TECH WORKSHOP services.

More from www.merlinmotorsport.co.uk or 01249 782 101 ENDS.

ROCKERS ROLLIN’? WASN’T THAT A QUO SONG?

Conventional rocker arms produce some sideways movement of the valve stems causing high levels of friction and subsequent wear to both stems and valve guides.

Now Burton Power is able to offer a Roller Rocker Assembly for the Ford Kent engine.

Roller Rockers virtually eliminate valve and guide wear due to their strong-arm construction and large low friction needle roller bearings.

The Burton Ford Crossflow OHV Kent Roller Rocker Assembly has a standard lift of 1.53:1 and is suitable for a multitude of applications including a whole shed load of kitcars!

The Burton Ford Crossflow OHV Kent Roller Rocker Assembly can be ordered as part number More >

WHAT A PERFORMER!

Since the introduction of E5 and E10 ethanol content fuels, there has been a steady rise in cases of hot fuel handling issues. This has been especially evident in V8 engines such as the Rover 3.5-litre and 3.9-litre, where superior heat insulation under the carburettor is a necessity.

Webcon has an answer with a genuine Edelbrock heat insulator gasket to suit the Weber-Edelbrock Performer four-barrel carburettor.

The insulator is manufactured from an 8mm thick nitrile rubber composite and is available as part number 9266.

It is available from stock, priced at £44.08 inc VAT and comes with the required extended studs to take More >

SEE CLEARLY BY DAY AND BY NIGHT!

NEW from Kit Spares are these cool DRL-style LED Headlights, ideal for a new build or as an upgrade.

The Crystal Halogen headlights cost just £78 per pair.

https://www.kitspares.co.uk/index.php?route=product/product&product_id=709

TVR DAMPERS

Leading suspension specialists GAZ has added to its list of GAZ ’Gold Professional’ applications for the classic TVR range, including Chimera, Griffith, Cerbera, T350, Sagaris, Tuscan, Tamora and TVR S.

The range represents an improvement on the successful GAZ Gold range. The coil-overs feature an HE15 aircraft-quality, high-tensile, anodised aluminium body, which is fitted with anodised adjusters for long-life. All units are individually tested before leaving the factory and are covered by a two-year warranty.

Ride height is adjustable through 60mm of adjustment and GAZ ’Gold Professional’ units are bump and rebound adjustable whilst on the vehicle by means of an easily accessible adjuster knob.

The More >

IT’S A WRAP

DEI’s EXO Series™ Exhaust and Pipe Wrap provides superior heat protection and insulation for pipes and exhausts repeatedly exposed to abrasive or high impact environmental conditions.

Whether it’s hillclimbing, rally or autocross racing, off-roading or dirt track racing, the EXO Series thermal wrap is the most durable and rugged wrap on the market.

Uniquely constructed with a dual-layer design of high temp glass fibre encased in a 304-grade stainless steel exoskeleton, this wrap provides rugged good looks, durability and superior heat protection. The exoskeleton construction creates an air gap between the wrap and the pipe for additional cooling and allows the wrap More >

STEVE SAYS – FRIDAY, MAY 29, 2020

WELCOME to totalkitcar online

A warm welcome to totalkitcar online …Prior to Boris putting the barriers down, whenever I went to, er, a function and people found out about my involvement with kitcars, they’d often remark how the kitcar industry ‘must be all over electric power’? They seem slightly put out when I reply that we should indeed be but other than Westfield with the Chesil, a few other companies with similar packages being developed and the odd one-off, we’re currently not as far advanced as I feel we should be. The MK Indy I drove about a dozen-odd years ago proved how well More >

KIT SPARES HELP FINISH YOUR SEATBELTS

New from Kit Spares is this Seat Belt Finishing Kit, which replaces the standard hex head bolt that you have to cover with a nut cover for the IVA Test.

The new finishing kit uses a countersunk 7/16 UNF bolt that has an aluminium cup with a radius that both complies with IVA and also enhances the appearance of your car.

They are available in Silver, Black and Orange at £22.20 each.

https://www.kitspares.co.uk/index.php?route=product/product&product_id=1357 ENDS.

 

MERLIN’S MAGIC BRAKES

Tilton has been designing and manufacturing brake components for over 40 years and Merlin Motorsport stocks their full range, which includes Tilton’s own Master Cylinders and Kits, Pedal Assemblies and Pedal Assembly Bulkhead, Chamber Brake Fluid Reservoirs, Brake Proportioning Valves and Service Repair Kit, Standard Brake Bias Adjuster cable and Throttle Linkage.

Merlin Tilton range can be viewed – go to – TILTON BRAKE PARTS

Merlin boss, Steven Roberts told me: “We’ve had quite a few customers asking for advice about how the Tilton throttle linkage actually fits and works with the floor-mounted pedal assembly.

“Having been slightly perplexed about this ourselves we decided to fit the More >