admin

This user hasn't shared any biographical information


Posts by admin

MAKE TIME FOR SPORTS

Original JBA Falcon Sports was lower, smaller and sportier-looking

JBA Motors arrived on the scene several years ago with their new take on the Falcon theme, with BMW donors and a beautifully built demonstrator that impressed me greatly when I drove it for a feature in TKC Mag in 2012.

Since then they’ve kept things low-key, mainly due to Bill Willcock being busy with his recycling machine business, although a steady flow of Falcon kits has kept the moulds ticking over.

In case you are unaware the original JBA Engineering operation was based in Lancashire and run by a wonderful pair of characters More >

MORE NEW COBRA STUFF FROM HAWK

Latest superb Cobra parts to added to Hawk Cars’ inventory are these glorious original-type cast iron exhaust manifolds as used on the original 260/289 Cobras.

Hawk boss Gerry Hawkridge has been tooling-up for a growing number of obsolete or rare as hens teeth components, adding in improvements and upgrades along the way.

His new manifolds cost £188.10 inc VAT with more information from www.hawkcars.co.uk or 01892 750 341 ENDS.

TIED UP IN KNOTS

Suitable for all automotive applications but especially useful for classic car owners and kitcar builders, this new cable tie and accessory kit from Gunson Tools (part number 77140), offers a versatile selection of cable ties and mounting tabs that will ensure neat and professional looking cable and harness installation.

The selection includes fifty of each size of cable tie: 2.5mm x 100mm, 3.6mm x 150mm and 4.8mm x 230mm; ten each of panel fixing cable ties, 3.5mm x 150mm and 4.8mm x 200mm (these are simply plugged into a suitable hole in the panel); ten each of the 4.8mm x 200mm More >

PAINLESS EXTRACTION

This versatile oil and fluid extractor from Laser Tools (part number 6534), has been designed to extract engine oil from engines via the dipstick tube (or oil service pipe if no dipstick fitted), using vacuum generated by workshop compressed air pressure. The 10-litre capacity allows the unit to be used on most modern engines and provides the capacity for at least one sump full of oil while still maintaining a good level of portability.

Three extraction hoses are supplied, specifically sized for extracting oil via the dipstick tube — two semi-rigid nylon for use on dip stick tubes and one flexible More >

LOOK, I’M REALLY NOT STOOPING TO KNOB JOKES!

Every rule has its exception and in the world of motorsport the exception is the billet-weighted gearknob. The rule is to keep everything as light as possible but strangely there is a benefit to having a weighted geartknob. It has a distinct feel that makes shifting easier and smoother – and possibly quicker, but that’s down to the driver.

The latest SK51 gearknobs from MOMO are made from solid billet aluminium and are therefore heavier than standard items. Their simple ball design is actually quite ergonomic and fits naturally into the hand.

Of course MOMO has added its own distinct Italian-style with More >

FUTURE IS BRIGHT FOR TYPE 25 OWNERS

For those who own or work on Type 25s, this new product from VW Heritage will be the proverbial music to your ears.

Plagued by problems, the Pierburg carburettors regularly get a bad press, and up until now the only way to fix them has been a complicated and not always successful rebuild procedure. Brand new replacements have been impossible to source.

These dark days are now over though, thanks to the hard work of the VW Heritage Product Development team. In partnership with carburettor champs Brosol, they have produced a direct replacement 2E model that is box-fresh and just waiting to More >

DON’T FORGET SUN-SCREEN

 

Crawl under any modern car and you’ll probably find that the underbody is protected from exhaust and catalytic converter heat by a metallic foil-like material. You’ll probably also find a similar material in the engine bay protecting panels, components and wiring from radiant heat.

Now thanks to DEI’s new self-adhesive Heat Screen, you can have the same protection in your kit or classic car, camper van and racecar. DEI Heat Screen is made from ‘Mylar’ and foil-laminated to a glassfibre matting backed with an aggressive pressure sensitive adhesive for easy peel-and-stick application with high cohesion strength.

Heat Screen is available in two More >

CAREFUL, IT’S QUICK!

The B-G Racing Quick Release can be used with even more steering wheels thanks to their new ‘3-to-6 hole’ adaptor.

The adaptor is multi-drilled for both 6 x 70mm and 6 x 74mm PCD bolt patterns, enabling the majority of aftermarket steering wheels to be fitted directly to a standard 3 x 50.8mm quick release.

The item also brings the steering wheel 12.7mm closer to the driver for increased steering input and driver comfort and is produced from high quality aluminium with an elegant black anodised finish and features a laser etched B-G logo. It is simple to fit and comes with More >

THE BIG THREE. IT WAS ALWAYS THE BIG THREE!

I’m a BIG fan of artist and photographer Keith Davies’ work – he specialises in short oval motorsport stuff and his latest ‘BIG THREE’ print took me straight back to my childhood and going with my late dad to venues like Aldershot, Wimbledon and Walthamstow to watch bangers and hot rods.

The print is so emotive for me I nearly burst into tears when I saw it. I confess to a definite lump in my throat. Showing George Polley (car 306; world champion 1976 & 1987), Mick ‘Duffy’ Collard (car 19; world champion 1980) and Barry Lee (car 351; world champion More >

COMPREHENSIVE FROM LASER TOOLS

This comprehensive 171-piece socket and bit set from Laser Tools (part number 6590) is ideal for the apprentice technician starting his professional toolkit, or for the dedicated enthusiast who demands the very best in high quality tools.

The three ratchets (1/2in, 3/8in and 1/4in drives) all feature super-smooth 72 tooth ratchet mechanisms and the range of sockets included is impressive: 17 x 1/2″drive standard sockets (10-32mm); 5 x 1/2indrive deep sockets (17-22mm); 10 x 3/8in drive standard sockets (10-19mm); 6 3/8in drive deep sockets (10-15mm); 10  x 1/4in drive standard sockets (4-14mm); 7 x 1/4in drive deep sockets (4-10mm); and 13 More >

z library