CAN’T BEAT BOUNCY SPRINGS
Mar 3rd
High-lift camshafts for GM LS engines are more the norm than the exception these days. Cams rated around .600 to .625 inches of valve lift are all over the place.
You’ll need a good set of valve springs to run one of those cams. Summit Racing™ Pro LS High-Lift Valve Springs are an inexpensive way to extend the engine’s operating range by around 1000rpm, which is not to be sniffed at. The springs are a drop-in replacement for factory springs and come in sets of sixteen.
Pro LS Valve Springs, .600″ Max Valve Lift • 1.290in diameter • 1.800in installed height at 135lbs More >
SUPER 3 SUPER COOL
Feb 24th
This one isn’t a kitcar OBVIOUSLY but there’s going to be a lot of interest in this new Super 3 from Morgan, especially among specialist car enthusiasts.
I think the Super 3 is an outstanding thing and a suitable replacement for the previous model. Gone is the Harley-derived S&S Cycle V-Twin engine to be replaced by a three-cylinder Ford 1.5-litre Dragon (albeit with the turbocharger removed) engine producing 118bhp. If you have driven a Focus ST, then you’ll be familiar with this engine.
The S&S motor was originally around that power output, but emissions regulations meant that in later years it was More >
CORDLESS SOLDERING
Feb 24th
New to the Laser Tools’ range is this rechargeable, cordless soldering iron (part number 8273) that features a battery charge level indicator and inbuilt LED, making it ideal for use in dimly lit areas such as engine bays and vehicle interiors.
The soldering iron is powered by an 1800mAh Li-ion battery providing usage time of approximately 1hr and reaches working temperature in approximately 15 seconds, with a range of 200° – 480°C. The supplied stand encloses the tip allowing for it to safely heat up and cool down. The battery is rechargeable through a USB socket on a PC or USB More >
THAT’S NOVEL
Feb 24th
Harnessing novel construction and material technology derived from its race-winning motorsport programme, Falken’s all-new AZENIS FK520 UHP tyre for performance and SUV applications offers motorists greater stability and fuel efficiency.
Falken’s ‘flagship’ next-generation AZENIS FK520 will initially come in 81 sizes, ranging from 17in to 21in, with a Y speed rating (300km/h).
Structurally stronger thanks to race-derived Aramid, the AZENIS FK520 assures motorists of more precise steering behaviour, while a 10 per cent weight reduction in comparison with its predecessor, the FK510, means decreased unsprung mass and rolling resistance, improving fuel efficiency.
Advanced 4D nano-simulation technology and a no-compromise approach by Falken’s engineers More >
YB COOLING HELPER!
Feb 24th
The Cosworth YB Engine has two thermostat/water housings that are comprised of an unusually complex rear section to house the thermostat and a front section that connects to the radiator bottom hose.
These castings can corrode and degrade over time, especially if the coolant has been neglected. Fortunately, Burton Power can supply replacements for both sections to bring the system back to prime condition.
The Front Section Connector (with plug) can be ordered as part number SC1074 at £38.50 inc VAT and the Rear Section Thermostat/Water Housing can be ordered as part number SC1073 at £60 inc VAT.
These housings are suitable for: More >
A TOOL YOU NEVER KNEW YOU NEEDED
Feb 24th
Webcon has announced that it has now reproduced the original Weber Auxilliary Venturi Puller.
In the process of doing so, Webcon has added a number of subtle improvements to ensure the quick and efficient removal of stubborn auxiliary venturis from Weber carburettors while minimising the chances of damage to the venturi or the carburettor.
This is an essential tool for anyone who overhauls Weber carburettors or a DIY kit and classic car enthusiast.
The Weber Auxilliary Venturi Puller can be ordered as part number 9800920000 at £105.77 inc VAT.
Available now from 01932 787 100 or via www.webcon.co.uk ENDS.
More >
POWER GENERATORS
Feb 24th
Machine Mart stores (and website) stock a wide range of Clarke Generators, providing a variety of options to help meet your needs.
Both the Clarke PG2500A and PG3800A provide a reliable source of power for leisure, DIY or light trade use.
Encased in a protective steel frame, both machines have four-stroke 5.6bhp engines and 15-litre fuel tank capacity, as well as featuring 2 x 230V 13amp domestic sockets and a 12V DC output facility for battery charging.
Automatic voltage regulation (AVR) enables sensitive electrical equipment, such as laptops, televisions, tablet computers etc., to be used with both models.
The Clarke PG3800ADV and PG6500ADVES are More >
THIS MAKES SENSE
Feb 24th
One of the bugbears of modern motoring is having the ‘Check Engine’ light come on, paying for a garage to check it out and finding that it’s not an engine fault, but the sensor ‘playing up’.
There are many reasons for a sensor giving a false warning or actually fail. Some can be prevented by fitting DEI’s new Thermal Sensor Covers.
DEI Thermal Sensor Covers will protect delicate sensors, plugs and wire connectors from heat, moisture and dirt. They are made from an aluminised insulation material that acts as a thermal barrier for sensitive wire connections and the sensors themselves.
DEI Thermal Sensor More >
NOPE, IT’S NOT A CHIP FRYER!
Feb 24th
New from Summit Racing are these Allstar Performance Ultrasonic cleaners.
Who knew all it took to super clean car parts is a touch of heat and some ultrasonic sound waves? Allstar Performance Ultrasonic Cleaners are available in two models. They are ideal for cleaning everything from oily and greasy parts and tools to items with tiny holes and crevices like carburettors and fuel injectors.
You can even use them to clean other things around the house like bicycle and mower parts, jewellery, watches and much more. Other features include heat dissipation holes to eliminate overheating, double fuse protection, and a drainage system that makes More >
A LIGHT FOR ALL OCCASIONS
Feb 24th
Ring has launched the RIL6000 series, a professional range of inspection lamps within its multi-award-winning MAGflex range, providing vehicle technicians and enthusiasts with the required lighting for any job, while highlighting its commitment to embracing evolving technology.
With the aim of streamlining its MAGflex offering, Ring has introduced four uniquely designed inspection lamps, with each product specially designed to offer complete versatility and reliability in the workshop.
The RIL6000 range provides light for any requirement, with the MAGflex Mini 250 (RRP £34.99) offering a compact but powerful lamp, with a lumen output of 250lm, and complete flexibility including a 180-degree flex base More >
