This new set of impact-quality drivers from Laser Tools (part number 8286) is specifically designed for the fixings used in disc and drum brakes. The set of five drivers includes hex (5mm, 6mm) and Torx® (T30, T40, and T50), which suit the most commonly used fixings used in these brake installations. These 40mm deep drivers are 3/8in drive and manufactured from chrome vanadium alloy steel for strength and black phosphate coated for corrosion resistance.

They make sure you’re fully prepared for brake system servicing with these brake fixing screw master sets from Connect Workshop Consumables: set number 34159 includes M10 and M12 screws (40 pieces) and set 34160 includes M6 and M8 screws (80 pieces).

With both sets, you have the most commonly used brake fixings in a variety of sizes, thread pitches and type of driver required (hex or Torx®). Plus, as usual with Connect master sets, all the fixings are individually part-numbered, so that you only need to re-order the screws you’ve used (in this case, Connect part numbers 34130 through to 34141.)

Remember – no need to purchase expensive OE dealer fixings, with Connect Workshop Consumables it’s Dealer No More! All are available now from your Laser Tools and Connect Workshop Consumables stockist.

More details from ENDS.