DYNAMAT SUPERLITE is a blue, high-efficiency sound damping material used to reduce noise and vibration in your car.
It is the same material as Dynamat Xtreme, but 30 per cent thinner (1.2mm) and 30 per cent lighter (700gms per sheet).
Use Dynamat SuperLite when you need to reduce the noise levels in your car without adding too much weight.
The 1.2mm thick butyl rubber layer is bonded to a gleaming blue, 0.002in (0.05mm) thick aluminium alloy foil.
It does not require any special equipment to fit (a little roller is great though), so it is very simple to cut and install.
It will conform easily to all interior surfaces and the sticky butyl rubber will adhere and stay in place without any special surface prep.
Dynamat SuperLite can be used for full coverage on your vehicle’s interior or just in problem areas of high sound resonation.
A car door typically requires about 5sq/ft of SuperLite, but you can apply it anywhere, including the boot, bonnet and roof.
Installation:
Dynamat SuperLite offers simple peel & stick installation.
• Measure and cut the Dynamat SuperLite sheets.
• Remove the paper liner.
• Place and press firmly to adhere.
Dynamat Superlite Bulk Pack contents:
Twelve sheets 1.2mm thick x 18in x 32in (457mm x 812mm).
Total coverage 48 square feet.
Weight 700gms per sheet.
Dynamat Superlite Bulk Pack #DYN10648
We have used this on a couple of project cars over the years and I also used it on an old washing machine that used to vibrate and ‘walk’ around the room. Dynamat sorted it out.
Each pack contains twelve sheets 1.2mm thick and gives total coverage of 48 sq/ft.
SKU: DYN1064 costs £228.00
More from www.carbuilder.com or 01580 891 309 ENDS.