Here’s one mainly for our North American readers
You’re trusting a few seals to keep water, crud and other bad stuff away from your engine, suspension, driveline, and even the interior. We suggest using seals from Seals-It. Its products protect expensive parts on everything from NASCAR racers to off-roaders, construction equipment, even aircraft – applications where failure due to a bad seal is not an option.
Summit Racing carries all sorts of Seals-It products including these – because seal failure isn’t an option for you, either.
Firewall Grommet Seals
Seals-It Firewall Grommet Seals are ideal for passing wiring, hose, hard line, etc. through the firewall into your interior. Made from a fireproof nitrile rubber material bonded to an aluminium bezel, the seals stretch to let components pass through, then spring back into place to seal tightly. That helps prevent damage from abrasion or chafing while keeping dust and fumes out of the cockpit.
Seals-It Firewall Grommet Seals are available as one-piece push-through or two-piece split grommets designed for use with existing hose, line, or wiring.
Axle Seals
Seals-It Axle Seals are designed to keep gear oil inside the centre section and dirt out. That prevents oil starvation of the ring and pinion gears and possible differential seizure.
Economy Series Seals are designed for use in factory-style axle housings. They feature a redesigned inner lip that tightly grips the inside of the axle tube to create a strong seal. The Economy Series axle seals can be used on either end or both ends of the axle tube.
High Performance Seals are made from billet aluminium. They use three O-rings to create a tight seal on the axle tube. Two bonded, heavy-duty neoprene inner seals compensate for any amount of axle shaft runout. AS Series axle seals are rebuildable and are strongly recommended for use with aftermarket axle housings.
Sealflex Elastomer Rod Ends
Sealflex Elastomer Rod Ends feature a unique molded and bonded construction that eliminates metal-to-metal contact. That allows the rod ends to absorb harshness and vibration and also compensate for misalignment without binding. Sealflex rod ends are available in 3/4-16, 5/8-18, and 1/2-20 RH thread sizes.
Summit Racing also carries these Seals-It products:
• Rod end seals and dust boots
• Axle seal rebuild kits
• Gauge vibration isolators
• Mechanical fuel pump seals
CHECK SEALS-IT PRODUCTS AT SUMMIT RACING ENDS.
