Instead of storing fasteners in cups or sandwich bags and relying on memory to remember which bolt belongs to what part, Boltster organisers take the guesswork out of keeping fasteners for a job organised in one place. They are made from high-strength silicone that is chemical-resistant and heat-resistant up to 500 degrees Fahrenheit.

Summit Racing carries three styles of Boltster organisers. They’re backed by a one-year limited warranty.

The Original Boltster is a flexible mat with 765 holes to organise fasteners in any configuration you need. The main holes can hold bolts as small as M7 and as large as M17.

The small holes around the perimeter are ideal to hold small screws, rivets, dowels and body panel clips. Use the large blank pad to write or apply a project label so you know exactly what all those fasteners are for.

The Original Boltster is also ideal for storing drill bits, dowels, studs, rivets, or other small tools and fasteners.

Never lose a bit or screw again with the Bitster. One section has 120 holes in four patterns to hold bits and fasteners from 1mm to 5mm. The other section is a tray area with a neodymium magnet to hold loose fasteners or bits. That magnet is strong enough to secure the Bitster to a metal toolbox or cabinet, even when loaded with up to 500gm of fasteners.

The Bitster has a large hole in the upper left corner so you can hang it out of the way with the included carabiner belt clip.

Boltster’s Flexible Organising Tray has four compartments. Three have organiser webbing to hold fasteners from M4 up to M24 (approximately 5/32 to 1in. The fourth has a solid base to hold small tools and larger fasteners. The Flexible Organising Tray has 35mm high sidewalls so almost nothing will roll out, plus two oversized handles that won’t twist or collapse when you load the tray.

More from ENDS.