Twenty-first century technicians working on twenty-first century motor cars need twenty-first century tools and this new set from Laser Tools includes ten specialist sockets that are essential for today’s automotive servicing. If you have not got the specialist tool you cannot carry out the specialist job.

Included is a 10mm special six-point socket for the Toyota idle wheel centre screw, a 6mm special six-point socket for Nissan and Renault clutches, the 8mm special six-point for Nissan cylinder head and balance shaft screws, 12mm six-point for Nissan head bolts, an 8mm special three-point for Nissan balance shaft screws, a 10mm pentagon for More >


Mini Spares High Capacity Water Pumps were designed for overseas use where it’s ofeten warmer than the UK.

These higher capacity pumps move more coolant than the stock ones and are of better quality.

They have a much larger impeller that sticks into the block slightly more than the usual ½in and is made from cast iron, rather than stamped steel as with many aftermarket pumps.

This water pump will fit all 1275cc blocks and most 998/1098 from 1969-on.

The use of a high capacity water pump helps to reduce cavitation in the water jacket, particularly at high RPM, as well as circulating a More >


A great new product from Temair Motor Sport is DAYLube NanoCeramic Racing Grease, which is a highly stable lubricant that delivers un-matched performance, durability and wear resistance.

NanoCeramic particles, the key component, act as sub-microscopic ball bearings that have an attraction to steel, providing continuous lubrication at the surface. These sub-microscopic balls are fabricated over a calcium sulphonate thickener and offer a lower coefficient of friction at ALL temperatures.

A 16-oz cartridge costs £34.44 and is available from www.temairmotorsport.com where you can find out information about their other products ENDS.


Caterham Cars, has developed its most extreme race-ready version of the Seven to date – the Superlight R600.

With stunning performance potential and all the character of existing Caterham circuit cars, the new supercharged incarnation of the Seven will represent the top echelon of the Caterham racing spectrum in the Superlight R600 Championship from 2013.

Powered by a supercharged, 2-litre Ford Duratec engine, producing 275bhp, the R600’s dedicated championship will further extend the Caterham Motorsport ‘ladder’, currently topped by the hugely successful R300 series.

The R600 race car, which costs £44,995, will be the first Seven ever to feature forced induction technology, making More >


Buy a kit from Road Track Race, build it in 12-months, get the IVA-test for FREE

TEAM MEV-member, Road Track Race, makers of Rocket, Race Rocket, Mevabusa, Sonic, Atomic and tR1ke has come up with an industry-first this week, by announcing that the price of all their kit packages will now include the cost of an IVA test.

The only condition is that the car must be built within 12-months of purchase and this will save customers a healthy £450 for the IVA test fee alone…

Find out more from 0115 978 0677 or www.roadtrackrace.com ENDS.


One of the most popular products in the Britemax range is Black Max, which is formulated to quickly and easily remove stubborn, fine polish lines and micro swirls left behind by more aggressive buffing compounds that are often only noticed in direct sunlight.

Black Max is perfect for removing 3000-grit sanding marks, micro-surface imperfection and oxidation. By polishing with Black Max, the depth and brilliance of shine is simply dazzling.

Black Max contains no silicones or waxes and leaves a non-oily mirror-like surface ready to be sealed.

  • Swirl & oxidation removal
  • Removes 3000 sand grit marks
  • Medium scratch removal
  • Lubricated, fast acting abrasive cut
  • Will not load up More >


Early MGB models (up to 1965) used a ‘banjo’ type rear axle, whereas later examples had a Salisbury type item.

While the banjo axle was adequate for road use, when subjected to the rigours of racing broken half-shafts were common. The later Salisbury axle was much tougher, having been designed for the six-cylinder MGC, later five bearing MGBs and also the MGB V8.

Cambridge Motorsport Parts can now offer a race banjo axle casing for early MGB models that incorporates the later style half-shafts, back plates and brake drums making it a direct fit on early MGBs, instantly providing an upgrade and More >


Burton Power can now supply brand new BDG 2-litre engine blocks cast in aluminium alloy.

These lightweight blocks are made from genuine new Cosworth/Ford castings and even incorporate the Ford logo.

They come complete with liners pre-fitted and bored to a finished size of 90mm, while two bolt-type steel main caps are also installed. This block is almost the same as the Cosworth BDG block released last year but it has steel liners instead of the more expensive Nikosil versions, bringing down the overall price substantially.

The Cosworth/Ford BDG 2.0 litre engine block retails at £4295 inc VAT outright and is listed under More >


Why waste your money on ‘cheap’ inferior imported copies when you can have this high quality, Mini Spares diecast rocker cover at such an affordable price?

This great-looking cover will fit nearly all A-Series BMC/BL models from the Mini to the MG Midget and retails at just £27.24 inc VAT and is ideal for the myriad kitcars powered by this engine.

Bolting on an aluminium valve cover is the age-old way to dress up the engine compartment on any car, and this finned aluminium valve cover utilises the classic flat-top ‘Weslake’ design.

Apart from looking good a polished aluminium valve cover will help More >


In motorsport strength and light weight are of equal importance, which is why Jenvey has developed this compact but incredibly strong carbon fibre air box backing plate for their throttle body assemblies.

It is supplied ‘blank’ and can be cut to suit most Jenvey throttle bodies, including SF, DCOE and DHT styles.

The backing plate retails at just £98.40 inc VAT.

For more details contact 01746 768 810 or visit www.jenvey.co.uk ENDS.