admin

This user hasn't shared any biographical information


Posts by admin

MRS BUCKET

The Scratchshield is a handy product when cleaning your car. It sits in the bottom of your bucket and stops crud and debris from being picked up with your sponge when washing your car. Some twenty years after it was first announced a new version has just been unveiled.

Little magnet does all the work

It’s called the ‘Grit Magnet’ and has been launched by Wizzard Products due to the considerable amount of tiny dirt and fall-out on your vehicle’s bodywork that contains ferritic particles. With Grit Magnet, a small magnet is inserted into one of the Scratchshield’s legs.

In tests carried out More >

BE AN INDIVIDUAL

Gradient Engineering is a company tearing up a few trees with their range of genuine direct-to-head throttle bodies that have been developed through motorsport use.

The list of engines that can be catered for is a growing one but currently includes Mazda MX-5 (NA and NB), Ford CVH and Ford Zetec. The bodies are individual type and are spaced to suit the engine.

There are no bends and no intermediaries and are available in all sorts of anodised colours including black, orange and blue with prices starting at around £1995 inc VAT.

For more information contact www.gradient-engineering.com or 01455 891 321 ENDS.

More >

WESTFIELD’S CHESIL – IT’S ELECTRIC BUT YOU CAN HAVE ‘ICE’, TOO!

Westfield Sports Cars were out in force at Stoneleigh 2022 and the company reports good order books. They are particularly flying with their Chesil Speedster both in kit and fully built formats

Although the Chesil E electric version is attracting a lot of attention – not to mention orders – the traditional Beetle-based original is still doing well.

The Classic Chesil with air-cooled engine costs from £32,995 in VAT in complete kit form or from £41,170 inc VAT in fully built guise.

Meanwhile, the electric Chesil E with 120kW motor (0-60mph in under five seconds!) that gives an approximate range of 200-miles on More >

TIP-TOP BATTERY CONDITIONER

The spring ritual is a must for any kit or classic car owner because when it finally comes to hitting that open road again it’s essential to make sure that your pride and joy is ready, including, say vehicle charging specialists CTEK, making sure your batteries are in tip-top condition.

Even if you have ‘winterised’ your classic car as best as you could, it’s still a good idea to check everything over. There’s nothing more annoying than planning that first glorious drive and finding your battery is dead.

Taking care of a classic car isn’t the same as looking after a new More >

HUMAN DYNAMO

If your kitcar is equipped with a Lucas 22255 dynamo it might be showing signs of wear and tyre. Help is at hand from the good folk at Car Builder Solutions and their Dynamo 110483 Lucas Replacement.

It is 12-volt and 11-amp and has a 15mm diameter shaft that is 18mm long with a 1/8in ‘key’.

It rotates clockwise and you need to know that because that sort of information is vital with a dynamo. It can accommodate all mounting holes from 8mm to M8.

The case diameter is 102mm and the item weighs 5.6kg and it wears the part reference ‘#DYNAMO3’

You can More >

SLIGHT BUT PLEASING REVAMP FOR DUTTON SURF

Great to see Tim Dutton exhibiting at Stoneleigh and he brought along his new improved Surf model, which features a redesigned bonnet. Basically, Tim has done away with the previous side strakes and altered the moulding into a much more cohesive and visually appealing panel.

You can buy a Surf or its sister, Reef in kit and fully built form and if you are going the DIY route the good news is that Tim now does a lot of the hard work for you. He’s all heart is Mr D. Seriously though; the reason is that it makes it easier for More >

SIT IN COMFORT

Those trim meisters at Telford-based Intatrim were at Stoneleigh last weekend with a stand abounding with their seating handiwork.

The company can supply a whole range of ‘off the peg’ seating and trim solutions for your project but in recent years have begun to specialise in Cobra replica interiors as well as bespoke creations. They also include lots of optional extras as standard such as fastener covers, over mats and bum warmers. See their website for full details.

Find out more at www.intatrim.co.uk or call 01952 587 672 ENDS.

CORDLESS GRINDING – A LUXURY

Mirka UK is expanding its innovative product portfolio with the launch of its first battery-powered grinding tool, which enables repairers to switch quickly to an accessory, so they have the right tool for the job at hand, increasing productivity and reducing repair times.

The versatile Mirka® ANGOS ARG-B200 can be used for multiple applications including metal grinding, paint removal, surface conditioning, cutting and deburring. A selection of accessories are sold separately to the tool enabling the technician to change the attachment quickly depending on the job. They include 50mm Quick-lock discs, Abranet® max flap discs, deburring tools, and other tools that fit a More >

YOU NEED SLEEVES

Wraparound braided harness sleeving from Connect Workshop Consumables – this self-closing braided sleeving provides a lightweight and easy to install solution for protecting and tidying electrical wiring harnesses.

It is flame retardant, has an operating temperature range of -40°C to +150°C, is resistant to most chemicals and solvents, and has excellent noise vibration reduction properties, making it suitable for automotive use. It is ideal for use when repairing an existing wiring harness or loom, or for helping to secure additional wiring for new components such as aftermarket audio equipment, car alarm, reversing sensors and cameras, or a vehicle tracker. The braided More >

ANOTHER TRIBUTE FROM TRIBUTE AUTOMOTIVE

A new product from Tribute Automotive is a rather fetching tribute (sorry – ed) to the classic BMW 507, based, rather handily on Z3. Tribute boss Chris Welch is cracking on with this new one and encouraged by positive comments to posts on the company’s Facebook page.

Early days yet and no information on pricing as yet but we’ll bring you that info as soon as it’s announced. One thing is for sure, it’ll be an effective pastiche, easy to build and affordable.

In the meantime and until Chris releases more images you can find out more about Tribute’s existing products at More >

z library