You know how it is. You’ve got a small fastener that’s got a high-torque requirement, so you need a stronger driver than the standard ¼in. A 3/8in drive ratchet will fit the bill but you’ve only got a ¼in drive socket in the correct size. Now you’re sure you’ve got an adaptor somewhere? But where is it?

This new socket and bit adaptor set from Laser Tools (part number 7167) supplies a comprehensive selection of the most-used adaptors presented in a machine-cut foam tray that fits neatly in the tool tray. You’ll never have to search for the correct adaptor again.

The contents include: six socket adaptors ½in drive to ¾in drive Male; ¾in drive to ½in drive M; ½in drive to 3/8in drive M; 3/8in drive to ½in drive M; 3/8in drive to ¼in drive M and ¼in drive to 3/8in drive M).

Five bit adaptors are supplied: ½in drive to 10mm hex; 3/8in drive to 10mm hex; 3/8in drive to 8mm hex; ¼in drive to 8mm hex and ¼in drive to ¼in hex. The bit adaptors are all provided with a spring-loaded ball to hold the bits securely.

Three quick-chuck drill adaptors: convert to ½in drive, 3/8in drive or ¼in drive. Plus, two quick-chuck ¼in bit holders, both 60mm long, one with a quick release function.

This socket adaptor set keeps all the adaptors secure in one place in the toolbox. Available now from your Laser Tools stockist, typically priced at £52.42inc VAT).

More information from ENDS.